A polyethylene backed tape with a butyl rubber adhesive. It is compatible with coal tar, fusion bond epoxy, asphalt, and polyethylene coatings.
- Excellent adhesion to berm
- UV Resistant
- Good conformability and consistent uniform thickness
- Easily applied with no special equipment
- Compatible with polyethylene coatings
- Resistance to cathodic disbonding
- Meets AWWA C
For application the minimum roll temperature for application should be 60°F (18°C). Peel back clear cover of tape and apply the adhesive side to the surface, and press down. Allow to cure in the sun before use for best results.
Note: The adhesive is on.
Tape should be stored in a dry and ventilated location. The storage temperature should be a minimum of 35°F (1.7°C) and a maximum of 110°F (44°C)
| Part Number | Description | Dimensions LxWxH in. (cm.) |
Weight lb. (kg.) |
| 8298 | PE Tape 4-Inch | 600x4x6 (1524x10.16x15.24) | 3 (1.4) |
| 8299 | PE Tape 6-Inch | 600x6x6 (1524x15.24x15.24) | 6 (2.72) |
